Menu

in: How To, Skills

• Last updated: September 25, 2021

Kid Craft of the Week: Pencil Catapult

Pencil Catapult placed on ground.

While much of the world is in quarantine of some form, and often sequestered with children who are itching for something to do, we thought it would be fun to offer a weekly craft/project idea you can work on together to help while away the time. If you make the craft, we’d love to see it; share on social media with the hashtag #aomkidcraft. 

Catapults have been around for a long, long time. Some records peg their first appearance to the 3rd century BC in China. Others say the Greeks were the first to launch projectiles into the air. Adding to the confusion is the sheer variety of catapult styles, ranging from creations like trebuchets to machines that looked more like giant crossbows than traditional catapults. 

One thing they all have in common is how they work. All catapults function by storing energy, usually through tension, and then releasing it in a way that launches a projectile over a great distance. The biggest medieval catapults could launch 300-pound stones over 1,000 feet. 

Replicating a full-size medieval catapult is probably beyond the scope of a craft project for kids, but that doesn’t mean you’re out of luck. If you’ve got a dozen pencils, some masking tape, and a few rubber bands, you’re well on your way to creating your own miniature version. Building one is easy and offers a great opportunity to teach kids about basic building principles, how levers and springs work, or even more advanced ideas, like the shape of a parabola or how potential energy works. But really, learning opportunities aside, they’re mostly just a lot of fun to make and play with!

Below is how to construct your own. These instructions have a specific set of materials, but there are lots of options for substitutions if you don’t have these things lying around. For example, you could use a spoon or measuring cup in place of the cardboard box, string instead of rubber bands, and any type of tape.

How to Make a Pencil Catapult

Accessories like pencils, Scissor, Tape, Rubber bands and card board displayed on the ground.

Supplies

  1. Scissors
  2. Small piece of cardboard
  3. Rubber bands
  4. 12 pencils
  5. Masking tape

Step 1: Make a Pencil Triangle

Pencils are kept on each other along with rubber bands.

Arrange 3 pencils into an equilateral triangle. For extra stability down the road, make sure at least one side of your triangle has two eraser ends pointing down. The erasers will act as grippy feet for your catapult.

Attaching pencils with the help of rubber bands to make them triangular shaped.

Two pencils attached with rubber band at one end.

Use rubber bands to bind them together where they meet at the corners.

Step 2: Reinforce the Triangle

Taping one side of pencils.

Pencils are attached with each other in a triangular shape with the help of tape.

Lock in your triangle’s shape and pencil position by reinforcing each joint with a narrow strip of masking tape. 

Step 3: Make Another Triangle

Two triangular shaped attached pencils kept on the ground.

Repeat steps 1 and 2 to make another identical triangle. These will act as your main catapult supports. 

Step 4: Connect the Supports (At the Top)

Connecting the two triangular shaped pencils with a single pencil from top.

Boat like structure of pencils along with scissor and other pencils displayed on ground.

Span the top of your catapult supports by taping another pencil from peak to peak. No rubber band needed here. 

Step 5: Connect the Supports (At the Bottom)

Connecting the Supports at the bottom with pencils.

Repeat step 4, but at the bottom of your catapult supports. Again, no rubber bands needed, just tape. 

Step 6: Attach the Pivot

Attaching a pencil halfway up one side of the supports using rubber bands.

Attach a pencil halfway up one side of your supports using rubber bands.

Attaching a pencil halfway up on the other side of the supports by rubber bands.

Fixing pencils through Rubber Bands.

Rearranging Rubber bands with hand.

Start by hooking one end of the rubber band around the pencil’s end, then wrap it around both pencils until it’s tight and you can hook the remaining end.

Pyramid shape formed with the help of pencils.

This is the pivot point which will attach to your catapult’s arm. 

Step 7: Make the Catapult

Two pencils attached with each other with the help of tape.

Fasten two pencils together using masking tape. This will act as the arm of your catapult. Binding it at multiple points will help make it stronger. 

Step 8: Attach Catapult

Pencils are fixed by the help of tap and rubber bands.

Hut shape formed with the help of pencils, tape and rubber bands.

Attach your catapult arm to the middle of your pivot point using a rubber band. 

Step 9: Connect Rubber Bands

Rubber bands tied with each other.

Two rubber bands sharing a knot with each other.

Rubber bands sharing a tiet knot with the help of hands.

Connect two rubber bands with a simple hitch knot.

Rubber bands are stretched around the pencils.

Stretch them across your catapult supports opposite your pivot arm. Tie the ends together. Depending on the size of your rubber band, you may need to connect three or more rubber bands to span the distance. 

Step 10: Make the Launcher

Cutting small slits into each side and folding up the middle of the card board.

Cut out a square of cardboard approximately 3 by 3.5 inches. Cut small slits into each side and fold up the middle.

Cut small slits into each side of card board and folded it up from the middle.

A match box shaped card board displayed.

Then, fold the ends up and wrap the tabs around, securing them with tape to create a small box for your projectile. 

Step 11: Attach Launcher to Catapult

Tape applied around the card board.

Pencils are attached at the back of card board by tape.

Use tape to attach your cardboard box to the end of your catapult’s arm. 

Step 12: Launch! 

Make a projectile by balling up a piece of masking tape. To launch, load your tape ball in the cardboard box and position the opposite end of your catapult arm so it’s resting on the opposing rubber band. Then, press down on the catapult arm, just below the box, to build up tension. When you’re ready to fire, simply release the arm and watch the ball fly! 

The idea for this craft came from The Double Dangerous Book for Boys.

Here are some more fun, kid-friendly projects to keep your family busy:

Related Posts